Battery Terminal Screw Set for Automotive M6

Orbitron's Battery Terminal Screw Set improves energy efficiency when installing an Orbitron Microreactor by replacing the negative terminal screw on the battery. The longer bolts make it extremely convenient for installing various devices and for grounding.

The material is oxygen-free copper (pure copper) with a hard, highly conductive Orbitron silver plating, which provides excellent conductivity and stable power supply. It also moves electrons quantum mechanically, resulting in extremely efficient and fast movement.

Precautions

Use it on the negative battery terminal.
The included paste is a special Orbitron paste specifically for terminal screws. Apply this paste to the threaded area before use. Do not touch the paste with bare hands. If it comes into contact with your skin, immediately wash it off with soap.
Do not use on the positive battery terminal as a short circuit could cause serious damage to vehicle components.
Do not tighten too much as the material is soft. The tightening torque is 6Nm when using oil.
The silver parts are specially plated with silver. Repeated tightening and loosening will cause the plating to peel off and turn black. Touching them with bare hands can cause discoloration. Replace the bolts and nuts if they peel or discolor. This is a set of square-head terminal bolts and high nuts for self-propelled vehicles.

Bolt specifications

10mm x 10mm square head (5mm high)

Effective screw length: 35 mm (including shank 5 mm)

Screw diameter M6

Nut specifications

Screw diameter M6

Nut height 10mm

Tool used: 10mm wrench