Battery terminal screw set for motorcycles M6

Orbitron's Battery Terminal Screw Set improves energy efficiency when installing an Orbitron Microreactor by replacing the negative terminal screw on the battery. The longer bolts make it extremely convenient for installing various devices and for grounding.

The material is oxygen-free copper (pure copper) with a hard, highly conductive Orbitron silver plating, which provides excellent conductivity and stable power supply. It also moves electrons quantum mechanically, resulting in extremely efficient and fast movement.

Precautions

Use it on the negative battery terminal.
The included paste is a special Orbitron paste specifically for terminal screws. Apply this paste to the threaded area before use. Do not touch the paste with bare hands. If it comes into contact with your skin, immediately wash it off with soap.
Do not use on the positive battery terminal as a short circuit could cause serious damage to vehicle components.
Do not tighten too much as the material is soft. The tightening torque is 6Nm when using oil.
The silver parts are specially plated with silver. This will peel off with repeated tightening and loosening. It may also turn black. It is prone to discoloration if touched with bare hands. If the parts peel off or become discolored, replace the bolts and nuts. This is a set of terminal screws for motorcycles. It includes a set of set screws and flange nuts.

Bolt specifications

Effective length of the screw: 20 mm

Screw diameter M6

Nut specifications

Screw diameter M6

Nut height 6mm

Tool used: 10mm wrench