"My kerosene fan heater won't ignite even when I turn it on" or "It ignites once, but then shuts off immediately." These are frustrating issues to encounter during cold weather, and they don't have just one single cause.
Before your heater stops igniting on cold days: The option of fuel care for kerosene
Users who previously used the old Gerhon 3+ with kerosene have shared feedback about noticing changes in their fan heater's ignition and combustion status. The current GERHON for Kerosene is a fuel conditioning agent intended to be added to normal kerosene in recommended amounts for equipment in good working order.
If your unit actually won't ignite, shuts off immediately, or exhibits strange odors or abnormal combustion, do not continue using it by adding an additive; please prioritize inspection and maintenance of your equipment.
View user evaluations of the old product and information on GERHON for Kerosene
These are individual user impressions and do not guarantee the same results or repair effects with the current product.
I will state the most important thing first: If your kerosene fan heater is malfunctioning, I do not recommend forcing it to keep running by adding an additive. First, narrow down the cause by checking the fuel, filters, ventilation, error messages, and the condition of the unit itself. Only after that should you consider using GERHON for Kerosene.
For those considering continuous use with normal kerosene and heating equipment
GERHON for Kerosene is intended for use on the premise that both the kerosene and the equipment are normal. It is not meant for recycling old kerosene or repairing malfunctions like ignition failure or white smoke.
7 items to check when your kerosene fan heater won't ignite or turns off immediately
1. Is there enough kerosene?
Even if there is kerosene in the tank, it may not be supplied normally if the tank is not seated correctly or if there is an issue around the oil filler cap.
2. Are you using kerosene left over from last year?
Kerosene carried over from last season or stored in high-temperature areas or in direct sunlight may have deteriorated or become contaminated with moisture. Old kerosene can cause ignition failure, mid-operation shutdown, and odors.
"It looks clear, so it must be fine" is not always true. If you have even the slightest concern, the standard procedure is to replace it with fresh kerosene.
3. Are the oil filter or fuel supply lines dirty?
If debris or moisture accumulates in the oil filters on the tank side or the main unit, the kerosene will not flow properly. This is a section to check on equipment used for long periods or when using it for the first time in the season.
4. Is the rear air intake filter clogged with dust?
Fan heaters require air as well as fuel. If the rear filter is blocked by dust, the heater will lack the air necessary for combustion. Turn off the power, wait for it to cool down completely, and clean it according to the instruction manual.
5. Is there insufficient ventilation?
If you use the heater for a long time in a tightly sealed room, a ventilation warning may appear, or the safety device may trigger and shut the unit down. Periodic ventilation is essential.
6. Are there any error codes displayed?
If an error number is appearing on the display, please first check the manufacturer's instruction manual. If the same error persists despite multiple resets, it is safer to request an inspection rather than continuing to use the device.
7. Is it an issue with the equipment itself, such as the combustion chamber, sensors, or vaporizer?
If cleaning and using fresh kerosene do not improve the situation, there may be a defect in the unit itself, such as dirt in the combustion chamber, ignition system, flame sensor, or vaporizer. Especially for equipment used for many years, please make a judgment that includes the possibility of repair or replacement.
9mL for 18L of kerosene. Judge based on usage and conditions
The standard ratio is 0.5mL per 1L of kerosene. That is 9mL for 18L, and 10mL for 20L. As a guideline, 200mL covers approximately 22 uses of 18L, and 1L covers approximately 111 uses. Please do not use this in kerosene boilers that do not have a thermostat.
If there is an odor, white smoke, or abnormal combustion, stop using it immediately
In addition to difficulty igniting, if you notice a strong odor, white smoke, a flame that looks different than usual, or strange noises, do not continue operation. Turn off the power, ventilate the room, and follow the manufacturer's instructions for inspection.
Carbon monoxide is colorless and odorless. You cannot judge that it is "safe just because there is no smell."
How to interpret old Gerhon 3+ evaluations for the current GERHON for Kerosene
The old Gerhon 3+ was sold for many years as a product that could be used for gasoline, diesel, and kerosene, and has accumulated many user evaluations, including on Amazon. Published user reviews also include reports of users sensing changes in odors and soot when used in kerosene stoves.
However, these are individual user impressions. They do not demonstrate an effect of repairing a broken fan heater.
The current GERHON for Kerosene is a product based on Gerhon 3+ that has been specialized for kerosene use. It is positioned for use as daily fuel conditioning, on the premise of using normal kerosene and normal equipment.
View the differences between the old Gerhon 3+ and the current GERHON for Kerosene
Before using GERHON, first narrow down the cause of the malfunction
- Confirm the kerosene is fresh
- Check the filters and air intake
- Ventilate the room
- Check the error code
- If not improved, seek a manufacturer inspection
- If the equipment is normal, consider fuel conditioning
What are kerosene additives? Things to confirm before using them in stoves and fan heaters
View usage amounts for 18L of kerosene
Summary
When a kerosene fan heater won't ignite or turns off immediately, identify the cause before adding any additives. Things to check in particular include old kerosene, filters, ventilation, error codes, and general aging of the main unit.
If the equipment is normal and you are using fresh kerosene, the GERHON for Kerosene option is there for when you want to refine the combustion condition of the fuel.
View GERHON Fuel Conditioning for Kerosene
Choose a size that matches your kerosene usage
The 200mL size is 5,500 yen including tax, and the 1L size is 14,960 yen including tax. Check the requirements of the equipment you are using; you can choose 200mL for an initial, small amount, or 1L for continuous, high-volume use.
Try the 200mL GERHON for Kerosene / Continue with the 1L GERHON for Kerosene
Please also check the 5 things to check before the heating season before your first ignition of the season.
