冬の窓辺。去年の灯油や古い灯油を使う前の確認ポイントを解説する記事のイメージ

Can I use last year's kerosene? How to tell if old kerosene is safe to put in your oil heater

An explanation of whether it is safe to use last year's or old kerosene in oil fan heaters. We will outline the risks of degraded kerosene, common symptoms, how to dispose of it, and the positioning of JIS-standard kerosene.

Leftover kerosene from last winter. Many people think, "It looks clean, so why not just use it again this year?"

To put it simply: It is standard practice to use fresh, new kerosene for oil fan heaters and oil stoves, not kerosene carried over from the previous season. Old kerosene can cause ignition failure, premature flameout, odors, and equipment malfunctions.

For those considering continued use with normal kerosene and heating equipment

GERHON for Kerosene is intended for use with normal, fresh kerosene and equipment in good working order. It is not designed to regenerate old kerosene or to repair faults such as ignition failure or white smoke.

View the criteria for use before trying GERHON for Kerosene

Why last year's kerosene is a problem

While in storage, kerosene is affected by heat, light, air, and moisture. Depending on the storage location of the plastic tank and the condition of the container, degradation or the introduction of contaminants can occur.

Furthermore, it is difficult to judge the condition of the fuel by appearance alone.

Do not use kerosene if:

  • It was carried over from the last season
  • It was kept in a place exposed to direct sunlight
  • It was stored in a high-temperature area
  • There is a possibility that water or debris has mixed in
  • There is a possibility that other fuels have mixed in
  • Its storage history is unknown

Common symptoms when using old kerosene

  • Difficult to ignite, or fails to ignite
  • Flame goes out during operation
  • White smoke appears at ignition
  • Strong kerosene odor
  • Unstable combustion
  • Error codes displayed

If you experience any of these symptoms, please stop using the device immediately rather than repeatedly attempting to ignite it.

Can I add GERHON to use old kerosene?

We do not recommend the idea of "regenerating" old kerosene by adding GERHON.

GERHON for Kerosene is a fuel conditioning product intended for use with normal kerosene. It is not a restorative agent capable of returning degraded kerosene or fuel contaminated with water or debris to a usable state.

9mL for 18L of kerosene. Judge based on usage and conditions

The standard dosage is 0.5mL per 1L of kerosene. This means 9mL for 18L, or 10mL for 20L. A 200mL bottle lasts for about 22 treatments of 18L, while a 1L bottle lasts for about 111 treatments. Do not use in kerosene boilers without a thermostat.

View usage amounts for 18L of kerosene

Old Gelhorn 3+ vs. current GERHON for Kerosene

The old Gelhorn 3+ was sold for many years as a product compatible with gasoline, diesel, and kerosene, accumulating user feedback across platforms including Amazon. Some users did use it in kerosene heating equipment.

Based on that Gelhorn 3+ formula, we now offer GERHON for Kerosene, which is specifically optimized for kerosene use.

However, the existence of past reviews and usage history does not provide a reason to use old kerosene. Start by using new kerosene. That fundamental rule does not change.

For those who used the old Gelhorn 3+ with kerosene | Differences from the current GERHON for Kerosene

How to dispose of leftover kerosene

Do not dispose of kerosene down drains, onto the ground, or into rivers. Please check with your retailer, local gas station, or municipal guidelines and dispose of it according to local regulations.

GERHON dosage when using new kerosene

Use GERHON for Kerosene only after confirming you are using new kerosene and that your equipment is functioning normally. The dosage for an 18L plastic tank is summarized in detail in a separate article.

View usage amounts for 18L of kerosene

What are kerosene additives? Things to confirm before use

Summary

Even if you have kerosene left over from last year, you should not put it into your oil fan heater just because it feels like a "waste" to throw it away. Heating equipment is heavily influenced by the condition of the fuel.

Use new kerosene. Keep your equipment in normal working order. Only then should you consider fuel conditioning. GERHON for Kerosene is a product intended to be used following this order.

View GERHON Fuel Conditioning for Kerosene

Choose the capacity that fits your kerosene usage

The 200mL bottle is 5,500 yen (tax included), and the 1L bottle is 14,960 yen (tax included). After checking your equipment's requirements, you can choose the 200mL bottle for initial use or small quantities, or the 1L bottle for continued, high-volume use.

Try GERHON for Kerosene (200mL) / Continue with GERHON for Kerosene (1L)

5 things to check before the heating season should also be read before your first ignition.

View all articles