You will see labels like "40B19L" or "55B24R" on your battery. These are not product names, but essential model numbers used to verify performance, dimensions, and terminal placement.
Breaking down 40B19L
Check if the battery is a maintainable type that allows for small additions
Battery Revive is exclusively for vented lead-acid batteries that allow for refilling. It cannot be used with MF, AGM, EFB, or gel batteries. Please first determine whether to inspect, charge, or replace the battery before considering this product.
40|B|19|L
40: Performance Rank
This is a guide to overall performance, combining starting power and capacity. It is not the simple Ah capacity itself.
B: Short Side Dimension Classification
This is a JIS classification related to the battery's width and box height. Categories include A, B, D, E, F, G, H, etc.
19: Approximate Length
Indicates a length of approximately 19 cm.
L: Terminal Polarity Position
Indicates the relative positions of the positive and negative terminals. Mixing up L and R can lead to problems such as cables not reaching or requiring forced wiring.
Requirement: Enough fluid headroom to add approximately 5mL per cell
For a standard 6-cell battery, this totals 30mL. Do not use if adding fluid would exceed the UPPER LEVEL (MAX) mark. Do not remove fluid to make room for the additive; if the fluid level is low, first manage the level correctly using purified water.
A higher number does not mean any battery can be swapped in
While you may sometimes be able to increase the performance rank, you must verify the external dimensions, terminal positions, mounting method, vehicle-side charging control, and whether the vehicle is equipped with an idling-stop system.
Do not decide based solely on the car model and year; check the currently installed model number and the manufacturer's compatibility chart. Batteries may vary depending on the grade and specifications.
Idling-stop vehicles may have a different model numbering system
Idling-stop vehicles have different model designations, such as M-42 and Q-85. There are also European standard EN batteries, as well as AGM and EFB types.
Click here for checklist if the idling-stop system is not working
Before using Battery Revive, check the structure, not just the model number
Battery Revive is intended for vented lead-acid batteries where you can open the refilling caps to check the fluid level. Do not determine usability based on the model number alone; check the physical structure of the battery.
Reference
Battery Association of Japan (BAJ): How to read automotive battery model numbers
Once you have confirmed the requirements, proceed to the 30mL product information
Battery Revive 30mL is 3,850 yen (tax included). This is not an emergency starting aid, nor is it a product that guarantees the repair of a failed or worn-out battery.
